EasySMX ESM-9110 Handle Cover Replacement

ID: 171956

Description: This guide will teach you how to remove the...

Steps:

  1. Use a Phillips #000 screwdriver to remove the two 10 mm screws from the back of controller.
    2. Step image Step image
  2. Insert a plastic opening tool into the slit on the side of controller.
  3. Wiggle the tool until the cover becomes loose.
  4. Repeat this on the other side of Controller.
  5. Go slow. Take your time removing the handle covers.
    6. Step image
  6. Remove the faceplate.
  7. Repeat on the other side of the controller.
    8. Step image
Back