PowerA Spectra Infinity Enhanced Vibration Motors Replacement

ID: 172076

Description: Use this guide to replace the vibration motors...

Steps:

1. Flip the controller so the back is facing up.

2. Remove the eight 10 mm screws from the back of the controller using a Phillips #0 screwdriver.

3. Unlock the trigger locks before removing the backplate.
4. This will make taking the plate off easier.
5. Use your fingers and carefully remove the backplate.

6. Remove the two 10 mm screws connecting the motherboard to the faceplate using a Phillips #0 screwdriver.

7. Use your hand to separate the motherboard from the face plate.

8. Remove the four 7.9 mm screws using a Phillips #0 screwdriver.

9. Use tweezers to unplug the small plug connecting the motors to the motherboard.
10. A firm grip may be necessary for this step.

11. Remove the completely freed vibration motor from the motherboard.