Soundboks 4 Tweeter Replacement

ID: 240415

Description: Does your speaker sound like being underwater?...

Steps:

1. Turn off your speaker by disconnecting the battery

2. Put the speaker flat down on its back
3. Use the hook in each corner and pull lightly upwards
4. Don't pull up the grille more than a few cm before all corners are loose
5. The grille is now removed by hand

6. Unscrew the 5 screws with a screwdriver or a drill (3mm hex bit) and gently remove the tweeter
7. Careful removing the tweeter as there are 2 cables connected to it
8. When screwing the new tweeter, tight it enough but without overdoing it

9. Gently press the tab on the cable connector and pull to remove the cables from the tweeter
10. The terminals has different sizes, to avoid wrong connections

11. Attach the cables to the new Tweeter, make sure to click them in and use the correct one for each clip size
12. You can follow the previous steps to put it back and get it running!