Braun Series 7 790cc-7 Charging Base Wire Harness Replacement

ID: 100286

Description: The charging base wire harness is essential to...

Steps:

1. Remove the cleaner cartridge from the charging base.

2. Depress the 4 tabs while lightly pulling the cover from the base.
3. Next, depress the 2 molded tabs while still pulling the cover from the base.

4. Press inward on the side charging port while pulling cover from the base to separate.

5. Remove side charging port by prying tabs outward and rotating port upward.

6. Remove charging terminals by inserting a spudger from bottom the and sliding terminals up.

7. Remove solder from circuit board and remove charging harness.