HP Pavilion 14-v062us Keyboard Replacement

ID: 100321

Description: HP Pavilion 14-v062us Keyboard If your HP...

Steps:

1. Power laptop off and make sure it is not plugged into charger
2. Push inward towards the center of laptop (it may take a lot of pressure). Battery should release once buttons are completely pushed in

3. Lift the battery upwards and out from the laptop

4. Remove rectangular rubber tops with a spudger
5. Remove the two 4.60 mm PH#1 screws located under rectangular rubber tops.
6. Remove plastic edge covering with the blue plastic opening tool.
7. Remove two 4.63 mm PH#1 screws located under plastic edge covering.

8. Use Phillips screwdriver #1
9. Remove all nine 7.09 mm PH#1 screw black screws including small rectangular cover.
10. Remove the three 7.14 mm PH#1 screws.
11. Remove the one 7.09 mm PH#1 screw that will be underneath the small rectangular cover

12. Remove disc tray
13. Locate screw within computer that is inside of where the disc tray was
14. Using a Phillips #1 screwdriver, unscrew the screw
15. Set laptop down and open laptop so the keyboard is facing you

16. Using a spudger or plastic opening tool, pry along siding of keyboard, where it connects to the rest of the laptop
17. Pry until you are able to lift entire face and keyboard
18. Only cables should be connecting it underneath

19. Disconnect/ unplug cables using plastic opening tool.
20. Separate the keyboard panel from the laptop with your hands.
21. Turn around the laptop and lay it flat.

22. Use a spudger to pry around the first layer of the silver panel until you are able to remove it
23. Only use a metal spudger as a last resort

24. Using a spudger tool, start prying around the second layer of the silver panel until you are able to remove it
25. Only use a metal spudger as a last resort