Samsung Galaxy J3 Middle Frame Bezel Replacement

ID: 100416

Description: The plastic covering over the camera can...

Steps:

  1. Separate the back casing from the phone by carefully using your fingers to pry it apart.
    2. Step image
  2. Remove all 11 screws by using the J000 phillips head from the 64 Bit Driver Kit.
    3. Step image
  3. Remove the battery by gripping on and pulling up.
    4. Step image
  4. Use the flat side of the metal spudger to remove the middle frame bezel, and replace.
  5. Do not use a wrenching motion while performing this step. The screen may crack.
    6. Step image Step image
Back