Panasonic ES2207P Motor Replacement

ID: 100547

Description: Motors may burn out or the eccentric may...

Steps:

1. Remove foil head and blades.

2. Remove (2) 7.9mm Phillips #0 screws.
3. Remove (2) 14.3mm Phillips #0 screws.

4. Push the blade mount assembly towards the rear of razor and remove.

5. Be careful not to break any tabs that hold the panels to the body.
6. Remove both external panels using spudger if necessary.

7. Remove (2) 7.9mm Phillips #0 screws.

8. This step may require a fair amount of force due to the O-ring.
9. Pull to separate the end-cap from the body.

10. Remove (2) 7.9mm Phillips #0 screws and remove endcap from frame.

11. Push forward on the lower terminal to remove the battery from the frame.

12. Remove battery contact.

13. Using pointed end of spudger, push on the motor through the hole in the back

14. Use your fingers to finish removing motor from frame.