Ambient Weather WS-1001-Wifi Push Button Replacement

ID: 100558

Description: In this repair guide, we will be replacing a...

Steps:

1. First, unscrew the 4 M2x1.5-7 screws (7mm length) from the back of the device using a number 1 Phillips screwdriver.
2. Pry the front silver panel away from the back black panel with a small plastic opening tool.

3. Next, the ribbon cable needs to be carefully removed from the back of the LCD screen.
4. Use a plastic opening tool to press the black bar towards the ribbon and away from the white bar gently. This will release the ribbon.

5. Heat up solder with soldering iron, and quickly use a desoldering gun to remove solder on the pins.

6. Once the button is removed place the new button down on the board.
7. Apply solder with soldering iron to the pins.