Basis B1 Band Battery Replacement

ID: 100561

Description: The battery can go bad on many devices. This...

Steps:

1. Wedge a plastic opening tool between band contacts.

2. Push in plastic opening tool until the components click and pop out of the holder.
3. Repeat steps for other band.

4. Remove four 4mm screws using a PH000 screwdriver.
5. Remove back plate.

6. Use tweezers to remove elastomeric, or zebra, connector.

7. Use the flat end of the spudger to carefully lift the battery until adhesive seal is broken.

8. Use the pointy edge of the spudger tool to detach battery leads from the circuit board.