Mio ALPHA 2 Battery Replacement

ID: 100568

Description: If your Mio ALPHA 2 heat rate monitor watch is...

Steps:

1. Remove the 4 JIS 00 6.71 mm screws.

2. Pull off the back cover of the watch after the 4 screws are removed from the first step.
3. Be careful not to remove the Data Strip (Brown Strip) from either chip.

4. Use some tweezers to remove the small white clip for the battery from the circuit board.

5. Slowly peel the battery off from the back cover of the watch.
6. There is double sided tape on the back side. Make sure to not tear up the tape. If the double sided tape is not reusable, replace with new tape.