d.light Solar Lantern S2 Circuit Board Replacement

ID: 100622

Description:

Steps:

1. To remove the lens, three T15 x 12.5mm screws must be removed by a T15 head screwdriver.
2. The location of the other two screws are marked in red.

3. After the lens has been removed the back cover needs to be removed. There are no snaps or screws holding it in place.

4. Remove battery by unplugging it from the circuit board.

5. Remove the circuit board by pressing on the mounting clips (shown in red circles) using the spudger.

6. Desolder the wires to free the circuit board.