HP Officejet Pro 6835 Cover Disassembly

ID: 103130

Description: This guide will teach you how to remove the...

Steps:

1. Open the main lid as far as it will go.
2. Use a plastic opening tool to gently pry off the hinge on the right side by pushing it to the left and off the hook.
3. Open the lid further.

4. Use a T9 torx screwdriver to remove a total of ten (10) 12mm screws from the main cover by turning the screwdriver counterclockwise.
5. The two screws above the screen assembly are deep so you may need a long screwdriver.

6. Grab the main cover and lift it up slightly.
7. Do not pull too hard—there is a cable connecting the cover to the printer.

8. Grab the base of the white ribbon cable connecting the cover to the base of the printer and pull it out.