HP Officejet Pro 8620 Left Panel Replacement

ID: 103146

Description: The left panel gives access to a variety of...

Steps:

1. Turn off the printer and remove the power cable.
2. Remove two 13mm T9 screws using a T9-Torx screwdriver. Turn counterclockwise until the screws are released.

3. Open the front door by placing your finger on the indented groove on the left side of the printer and pulling down
4. This will give you access to the two T9-TORX 13mm screws that need to be removed to release the panel.

5. Remove the two 13mm screws with a T9-TORX screwdriver by turning counter-clockwise (left).

6. Gently remove the left side panel by placing your palm flat against the surface and pulling down.