Lenovo IdeaCentre AIO 510S-23ISU Hard Drive Replacement

ID: 103221

Description: This requires only a Phillips head screwdriver....

Steps:

1. Turn off the computer, unplug all cables, and let it cool down. Lay the computer flat on its screen.
2. Make sure that the work surface is flat and has nothing sharp on it.

3. Remove the monitor stand screw in the bottom of the stand, and remove the stand completely.

4. Remove the two screws on the bottom of the computer, one on each side.

5. Locate the slot on the right side of the computer next to the screw hole. Use a plastic opening tool or spudger to pry off the rear cover. (Don’t be afraid to use a little force.)

6. Once it has been separated, lift to remove.

7. Unscrew the four screws that secure the hard drive enclosure.

8. Unplug the SATA cable. Lift to remove the hard drive enclosure.

9. Unscrew the four screws that hold hard drive enclosure to the hard drive, located on the side of the enclosure.

10. Lift the hard drive up to remove it from the enclosure.