Shark Rocket Professional Secondary Filters Replacement

ID: 103222

Description: Before completing this guide, it's important to...

Steps:

1. First, locate the button that says "Dust Cup". It is right next to the power button at the base of the handle.
2. Press the button down completely; you should feel a click.

3. Grab the handle of the dust cup, then pull up and away from the vacuum.
4. You must press the button and pull the dust cap simultaneously at first to release the latch.

5. As you look beneath the base of the dust cup, you will see a white foam filter. Remove this filter with your fingers.

6. Removing the first filter will reveal a second, thicker foam filter. Remove this as well.
7. Shark recommends that you rinse and air dry these filters monthly.
8. Remember to replace the filters in the correct order.

9. A dust filter is located within the dust cup. To access it, open the dust cup by pressing the orange tab on the front and pulling up on the handle.

10. Find the cylindrical screen in the center of the dust cap, grab the top, and pull it straight out.
11. If this filter is dirty, shake it or rinse it off to clean it.