Archos Jukebox Recorder 20 Hard Drive Replacement

ID: 103263

Description: In this guide the user will learn how to...

Steps:

1. Remove the plastic cover over the batteries on both sides of the device.

2. Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).

3. Use the T10 Torx Screwdriver to remove the 2 torx screws on each side of the device.
4. Two on each side for a total of four.

5. Remove the 2 screws on the top and the 2 screws on the bottom of the device using a Phillips #0 screwdriver.

6. Remove the outer metal casing of the device by popping it off with a plastic opening tool.

7. Remove the rubber bumpers on all four corners of the device.

8. Lift the hard drive out of its casing with the help of a plastic opening tool and slide it out. This will disconnect the pins connecting the drive to the rest of the device.