Hoover WindTunnel 2 Rewind Belt and Roller Brush Replacement

ID: 103327

Description: You will need to replace your belt and/or the...

Steps:

  1. Remove the four 20 mm Phillips #1 head screws holding the top cover on.
  2. Lift off the cover.
    3. Step image Step image
  3. Grab on both ends of the roller brush, lifting it and the attached belt clear of the housing.
    4. Step image
  4. Reinstall belt and roller making sure that the white text is facing outwards on the belt.
  5. Placing the roller brush in its guides will put some tension on the belt after the roller is in place spin it with your hand a couple times to ensure that it spins freely.
    6. Step image Step image
Back