Huawei P10 Back Cover Replacement

ID: 103377

Description: Use this guide to replace the back cover of...

Steps:

1. Switch off your phone.
2. Remove the two Pentalobe P2 screws at the bottom.
3. Remove the SIM card tray.

4. Insert a plastic opening tool between the display and the case starting at the bottom area of your phone.
5. Carefully pry the display with its parts out of the case.
6. Getting the prying tool in will require some effort, be careful not to slide the tool too much or you might slightly damage the housing.
7. After you pried out the bottom end, use the opening tool to open the clamps on both sides.

8. Don't open the phone all the way, yet. The cable for the standby and volume buttons is still connected to the back cover.
9. Swing open the phone backwards.
10. Use a spudger to disconnect the power- and volume button flex cable.