Hoover WindTunnel 2 Rewind Leaky Hose Replacement

ID: 103428

Description: The Hoover Windtunnel 2 Rewind's hose sometimes...

Steps:

  1. Detach the top of the hose from the device by pressing the release button and pulling up on the hose.
    2. Step image
  2. Remove the other end of the hose by twisting the hose clockwise and pulling it off.
    3. Step image
  3. Firmly insert the larger end of the replacement hose into the upward facing hole in the vacuum.
    4. Step image
  4. Line up the smaller end of the hose and insert it into the downward facing hole.
  5. Twist the hose until it locks.
    6. Step image
Back