HP Officejet 4630 LCD Display Replacement

ID: 103485

Description: This guide will show you how to remove the LCD...

Steps:

1. There is a hidden screw underneath the model sticker on the front panel.
2. Peel the model sticker off the cover.
3. This will expose the T10 screw securing the panel.

4. Remove the single 12mm-T10 screw securing the front panel to the printer body.
5. Loosen the panel cover from the printer body.
6. There is a ribbon cable connected to the backside of the cover. Disconnect the cable before separating the panel completely.

7. Gently remove the No-Fuss ribbon cable from the front panel.

8. Remove the seven 8mm screws using the Torx T6 screwdriver.
9. Remove the motherboard from the front-panel housing.
10. The LCD display is on the opposite side.