BEM Mojo 2 Charging Base Battery Replacement

ID: 105136

Description: Common issues that involve the charging base...

Steps:

  1. Use the metal spudger to peel back the rubber from the bottom of the auxiliary charging base to reveal the screw.
    2. Step image
  2. Use the screwdriver with the J0 bit attatched to detach all four 10 mm screws from the charging base.
    3. Step image
  3. Pull the top cover off of the charging base to reveal the internal chip.
  4. Use the plastic opening tool to pry the battery from the top cover.
  5. Caution: Be careful when detaching battery from top cover as to not damage any of the wires attached to it.
    6. Step image Step image
  6. Use the tweezers to carefully detach the wires from the internal chip.
  7. Caution: Be careful to not damage the internal chip when removing the wires.
    8. Step image
Back