Pioneer Elite PRO-RO6U Optical Drive Cooling Fan Replacement

ID: 105188

Description: Overheating can cause the Pioneer Elite PRO-R06...

Steps:

1. Remove the two 6.4 mm Phillips screws on each side of the device's casing.

2. Remove the two 6.5 mm Phillips screws on the back of the device casing.

3. Grip the front panel in one hand and the back of the casing in the other. Pull the casing back, and slide it up and away from the inner box.

4. To replace the optical drive cooling fan, grip the ribbon connector at M11 and gently remove by pulling away for the slot.

5. Flip the latch on the ribbon connector upward to allow for cable removal.
6. Grip the ribbon cable and remove by gently pulling away from the unlatched connector.

7. Remove the two 6.4 mm Phillips mounting screws on the optical drive cooling fan.

8. Grip the frame of the cooling fan and slide it toward the front panel, then lift out of the device.