Protocol Galileo Stealth Light Emitting Diode (LED) Replacement

ID: 105368

Description: This guide will walk you through how to replace...

Steps:

1. Remove the 8mm long Phillips #0 screws (24 total) from the lower housing unit.
2. Take care to place the screws in a safe place to prevent losing them.

3. Separate the upper and lower housing units by lightly pulling the two housing units apart.

4. Remove 6mm Phillips #0 screw from the LED strip.

5. Remove the LED strip from the housing by applying light pressure away from the lower housing with the plastic opening tool.
6. Take care not to damage the LED strip when removing it from the lower housing.

7. Unclip the wire plug from the motherboard by applying light pressure away from the motherboard with the plastic spudger.
8. Avoid damaging the wire plug, wires, and motherboard when removing the wire plug.