Logitech Extreme 3D Pro Joystick Trigger Replacement

ID: 105371

Description: After a long use the joystick trigger might...

Steps:

  1. Remove these three Phillips #1 screws:
  2. Two 10mm screws.
  3. One 7mm screw.
    4. Step image
  4. Using your fingers, lower the rubber boot to reveal two screws underneath the joystick.
  5. Remove the two 10mm Phillips #1 screws.
    6. Step image
  6. Pull apart the joystick chassis by hand.
  7. Release this clip located underneath the hand rest
  8. The circuit board will be loose and may fall down.
    9. Step image Step image
  9. Remove the plastic trigger from the joystick.
    10. Step image
Back