PowerRay Vertical Motor Unit Replacement

ID: 106662

Description:

Steps:

1. Remove the four protective parts on the back of the main unit.
2. Check the position of the nails and be careful not to break the parts.

3. Remove all of the following screws:
4. Red M2.5×6 (16 screws)
5. Blue M2×5 (2 screws)

6. Peel off warning and S/N seals
7. Remove the underside exterior

8. Remove any screws that secure the hermetic module to the exterior
9. Red M2.5×12 (8 pcs)
10. Green M2×5 (4 copies)
11. Removing the fixing screws of the vertical motor unit
12. M2.5×8(8Book)

13. Enter your knowledge here.