Dell Inspiron 17-5748 Speakers Replacement

ID: 106675

Description: This guide will show how to access and replace...

Steps:

  1. Flip the laptop upside down.
  2. Locate the battery lock latches.
  3. Step image
  4. Slide both lock latches to the unlocked position.
  5. Step image
  6. Lift the battery up and out of the laptop battery socket.
  7. Step image
  8. Remove the 4.5 mm Phillips #0 screw holding the Optical Drive in place.
  9. Slide the Optical Drive out of the device.
  10. Step image Step image Step image
  11. Remove the two 4.5 mm Phillips #0 screws on the access panel door.
  12. Step image Step image
  13. Using a plastic opening tool, pry open the access panel, exposing the disk drive, RAM, and wireless module.
  14. Step image Step image
  15. Remove the 2.5 mm Phillips #0 screw securing the hard drive.
  16. Slide the hard drive out using the pull tab.
  17. Remove the hard drive from the device.
  18. Step image Step image Step image
  19. Open the laptop and locate the keyboard.
  20. Step image
  21. Locate the 5 keyboard tabs at the side of the keyboard closest to the screen.
  22. Using a metal spudger, gently pry the keyboard tabs inwards until they loosened. You should hear a click.
  23. Step image Step image
  24. Do not remove the keyboard completely. The ribbon cable underneath, attaching it to the motherboard, must still be detached.
  25. Lift the keyboard partially and flip it over.
  26. Step image Step image
  27. Detach the ribbon cable from the motherboard by tilting up the black clip, releasing the cable.
  28. Gently detach the cable and the keyboard from the laptop.
  29. Step image Step image
  30. Remove the five 4.5 mm Phillips #0 screws found under the keyboard.
  31. Step image
  32. Do not fully remove the palm rest until the ribbon cable underneath is detached.
  33. Using a plastic opening tool, separate the plastic palm rest and partially lift the palm rest from the device.
  34. Remove both ends of the ribbon cable. This can be done by flipping up the black tabs securing both ends.
  35. Remove the palm rest from the device.
  36. Step image Step image Step image
  37. Locate the first speaker.
  38. Unplug the speaker cable.
  39. Step image Step image Step image
  40. Lift the speaker from the corner.
  41. Remove the speaker.
  42. Step image Step image
  43. Using the plastic opening tool, gently remove the second speaker.
  44. Step image Step image
Back