Dell Latitude E4310 Display Replacement

ID: 106706

Description: This guide walks through how to remove and...

Steps:

  1. Power down the laptop and remove all power cords.
    2. Step image
  2. Push in the battery release button with your thumb.
  3. Pull up on the battery to remove.
    4. Step image Step image
  4. Open up the laptop and flatten it down on a workable surface.
  5. Turn it around so that the screen is closest to you.
  6. Insert the flat end of a spudger, or plastic opening tool, into the groove between the screen bezel and top case.
  7. Twist the spudger, or plastic opening tool, until you hear a clicking sound and continue doing this around the entirety of the display.
  8. Remove the bezel.
    9. Step image Step image Step image
  9. Remove the six 0.3mm Phillips #1 screws.
    10. Step image Step image
  10. Remove the two 0.5mm Phillips #1 screws.
  11. There are two screws located at each corner. Only remove the ones closest to the outer edge.
    12. Step image Step image
  12. Carefully lift the screen up and flip it over onto the keyboard side as if you were turning the page of a book.
    13. Step image Step image
  13. Use a pair of tweezers to flip the blue tape 180 degrees.
  14. By flipping the tape you disconnect the display connector.
    15. Step image Step image Step image
  15. Remove the screen from the laptop.
    16. Step image
Back