Garmin Approach S2 Screen Replacement

ID: 106715

Description: In this guide there are delicate parts that...

Steps:

1. Remove the six T5 Torx 6.32mm screws securing the back cover to the watch.

2. Remove the back cover carefully.
3. Even after the screws have been removed, the back cover can still be quite difficult to take off. Moderate to extensive prying may be required. Be gentle, but firm.

4. Remove the orange gasket.

5. Remove the screen and motherboard assembly from the case.

6. Use a metal spudger to remove the golden retaining clip from the screen. There will be some adhesive to break.

7. Remove the screen from the golden metal clip.

8. Unhinge the black retaining hinge by prying it open with the metal spudger; Your fingernails will work as well.

9. Remove the connector from the motherboard by pulling it free at the base.
10. Make sure to pull from the base of the connector wire, as it is very easy to rip the wire from the screen.

11. Remove the screen from the motherboard.
12. Notice our tape retaining the connector to the screen. This is so easy to rip!