Dell Inspiron 1122 M102z Memory Modules Replacement

ID: 106731

Description: In this guide, we will be showing you how to...

Steps:

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.
  2. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
  3. Slide the battery release latches to the unlock position.
    4. Step image
  4. Slide the battery out of the battery bay.
    5. Step image
  5. Slide the battery into the battery bay, until it clicks into place.
    6. Step image
  6. WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before You Begin.
  7. Loosen the captive screw that secures the memory-module cover to the computer base.
    8. Step image
  8. Lift the memory-module cover off the computer base.
    9. Step image
  9. CAUTION: To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips.
  10. Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the memory module pops up.
    11. Step image
  11. Remove the memory module from the memory-module connector.
    12. Step image
  12. CAUTION: If you need to install memory modules in two connectors, install a memory module in the lower connector before you install a memory module in the upper connector.
  13. Align the notch in the NEW memory module with the tab in the memory-module connector.
    14. Step image
  14. Slide the memory module firmly into the memory-module connector at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the click, remove the memory module and reinstall it.
  15. NOTE: If the memory module is not installed properly, the computer may not boot.
    16. Step image
  16. Slide the tabs on the memory-module cover into the slots on the computer base and gently press the memory-module cover into place.
    17. Step image
  17. Tighten the screw that secures the memory-module cover to the computer base.
    18. Step image
Back