Dell Inspiron 11z 1110 Display Assembly Replacement

ID: 106733

Description: In this guide, we will show you how to remove...

Steps:

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.
  2. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
  3. Make note of the cable routing and carefully dislodge the Mini-Card antenna cables from the routing guides.
    4. Step image
  4. Disconnect the display cable and the camera cable from the system board connectors.
    5. Step image
  5. Remove the two screws (one on each side) that secure the display assembly to the computer base.
    6. Step image
  6. Lift the display assembly off the computer.
    7. Step image
  7. Place the NEW display assembly in position and replace the two screws (one on each side) that secure the display assembly to the computer base.
    8. Step image
  8. Route the Mini-Card antenna cables through the routing guides.
    9. Step image
Back