Huawei P10 Plus Display Replacement

ID: 106800

Description: In this guide we show you how to remove and...

Steps:

1. Use an iOpener to loosen the adhesive beneath the display, focusing on the upper and lower part of the display.
2. Use an opening pick, or iFlex, to separate the adhesive on all sides of the display.
3. To avoid damage to the display, do not push the tool too deeply into the phone.

4. There is a thin display cable between the screen and phone, be very careful not to rip it when opening the device.
5. Place a suction cup, or iSclack, on the upper portion of the phone and lift the display off the midframe.
6. Don't remove the display, the cable is trapped under a bracket screwed to the phone. You can flip the display to lay it down without straining the cable, or simply hold it in the next steps.

7. Remove the 3.3 mm-long Phillips screw securing the display flex connector bracket.

8. Open the metal bracket that covers the display flex cable.
9. Use a spudger to disconnect the display flex cable.
10. Remove the display.
11. When reassembling your phone replace old adhesive with double-sided tape or pre-cut adhesive strips.