Wolf Gourmet WGBL100S O-ring Replacement

ID: 108282

Description: If your blender is leaking or making strange...

Steps:

  1. Flip over the pitcher to expose the base of the blade assembly.
  2. Using the H4.0 Allen key from the 54 bit driver kit, attached to an impact driver, remove the socket head cap screw from the drive coupling.
  3. Apply a solvent to remove adhesive if necessary.
    4. Step image
  4. Using a pair of pliers, pull of the drive shaft coupling.
    5. Step image
  5. Using a flat head screwdriver and a mallet, bend down the two tabs holding the large nut.
    6. Step image Step image
  6. Remove the nut using a crescent wrench.
    7. Step image
  7. Push the blade assembly into the jar.
  8. Remove the blades from the device.
  9. Be careful not to cut yourself when handling the blades.
    10. Step image
  10. Use tweezers to pull off the o-ring.
  11. Be careful not to cut yourself while handling the blender blades.
    12. Step image Step image
Back