RedOctane X-Plorer Auxiliary Port Replacement

ID: 108312

Description: You can easily access the auxiliary port...

Steps:

1. Remove the strap by pulling it off of the mounts located on the body and neck.

2. Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.
3. Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.
4. These screws can also be Torx on some models.
5. Pull off the rear case.

6. Remove the five 12mm Phillips #1 screws along the neck with a screwdriver.
7. Pull off the top shell of the neck to expose the internal features.

8. Remove the two 10mm Phillips #1 screws from the auxiliary port board using a screwdriver.
9. Gently lift up on the auxiliary port to remove it from the case.