Canon PowerShot G7X Dial Replacement

ID: 108451

Description: In this guide, we will be showing you how to...

Steps:

1. Remove the five 2mm Phillips #000 screws that are under the screen of the camera.

2. Remove the two 3mm Phillips #000 screws under the AV-out digital flap.
3. Remove the two 3 mm Phillips #000 screws from the side of the camera.

4. Remove the two 3 mm Phillips #000 screws on the side of camera with the flash toggle.

5. Remove the four 4 mm Phillips #000 screws from the plate on the bottom of the camera.

6. Remove the back plate.

7. Remove the three 3 mm Phillips #000 screws around the dial.

8. Using the nylon spudger, gently lift the ZIF tab.
9. Disconnect the ribbon cable that connects the dial to the motherboard.
10. Remove the dial from the device.