Google Home LED Board Replacement

ID: 108494

Description: Fix the lights on the top of your Google Home...

Steps:

  1. Removing the lid too quickly could cause you to tear the interconnect cable that attaches the base to the top of the lid.
  2. Pull off the Google Home’s magnetically attached base and set it aside.
  3. Using a Torx T6 screwdriver head, unscrew the four 1.7mm Torx screws deep in the speaker recess so that you can remove the lid.
  4. After all four screws are out, pop the lid off the device to open the capsule.
    5. Step image Step image Step image
  5. Carefully remove the interconnect cable using a pair of tweezers.
    6. Step image
  6. Use a metal spudger to pry the LED board away from the lid.
  7. This will require some force because there is a strong adhesive layer that keeps the LED board attached to the lid, so don’t worry about being gentle.
  8. Remove the LED board.
    9. Step image Step image
Back