Dell Inspiron 14 M4040 Display Assembly Replacement

ID: 109818

Description: In this guide, we will show you how to remove...

Steps:

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer.
  2. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
  3. Disconnect the display cable from the connector on the system board.
    4. Step image
  4. Disconnect the Mini-Card antenna cables from the connectors on the Mini-Card.
    5. Step image
  5. Make a note of the display cable and Mini-Card antenna cables routing and remove the cables from the routing guides.
    6. Step image
  6. Remove the two screws that secure the display assembly to the computer base.
    7. Step image
  7. Lift and remove the display assembly out of the computer base.
    8. Step image
  8. Place the NEW display assembly in position and replace the two screws that secure the display assembly to the computer base.
    9. Step image
  9. Route the display cable and Mini-Card antenna cables through the routing guides.
    10. Step image
  10. Connect the display cable to the connector on the system board.
    11. Step image
Back