Dell Inspiron 1410 Display Assembly Replacement

ID: 109902

Description: In this guide, we will be showing you how to...

Steps:

  1. Before working inside your computer, read the safety information that shipped with your computer. Follow the instructions in Before Working Inside Your Computer.
  2. Remove the mylar tapes and then remove the two screws from the back of the computer.
    3. Step image Step image Step image
  3. NOTE: Note how the display cable is routed through their routing guides.
  4. Pull the display cable tab to disconnect the display cable from the system board connector.
    5. Step image
  5. Make note of the cable routing and carefully dislodge the WLAN antenna cables and the rest of the cables from their routing guides. Pull the cables away, so that they are clear of the palm rest.
    6. Step image
  6. Remove the two screws from either side of the display hinges.
    7. Step image
  7. Lift and remove the display assembly.
    8. Step image
  8. Place the NEW display assembly in place and replace the two screws on each side of the display hinges.
    9. Step image
  9. Re-route and connect the display cable to the connector on the system board.
    10. Step image
  10. Carefully route the WLAN antenna cables into their routing guides on the palm rest and through the computer base.
    11. Step image
Back