Linksys WAG200G Teardown

ID: 113283

Description: This guide will show the teardown of a Linksys...

Steps:

  1. Turn the router with the bottom facing upwards and locate the 4 feet.
  2. Use your nails or the opening tool to pry away each foot to reveal a screw, and unscrew each one.
  3. The front of the case can be disconnected from the backside now.
    4. Step image Step image
  4. The antenna cable is soldered to the board. It can be unsoldered or just cut.
  5. Use the pliers to make the underside of the antenna smaller so it can fit through the case hole, and at the same time, pull the antenna itself.
    6. Step image Step image
  6. The board can now be removed from the case easily.
  7. 10/100 Base-T Dual Port Transformer: HN2064CG
  8. CPU: TNETD7200ZDW
  9. 10/100 Ethernet Switch : 88E6060-RCJ1
    10. Step image
Back