DigiTech RP70 Motherboard Replacement

ID: 113477

Description: If you need to replace your motherboard or...

Steps:

1. Unplug the device from its AC power adapter; unplug anything connected to the input/output jacks.
2. Remove the four 8mm Phillips #0 screws located on the back panel.

3. Remove the back panel to expose the motherboard.

4. Remove the two 11mm #0 Phillips screws located at the bottom of the motherboard.

5. Lift the indented end of the motherboard opposite the input/output jacks. Then, pull away from the input/output jacks to slide the motherboard out of the casing.