Huawei P20 Pro Back Glass Replacement

ID: 113884

Description: If the back glass is broken on your Huawei P20...

Steps:

1. Put your phone on a clean work surface with good lighting.
2. If your back glass is shattered use clear tape to tape over the shattered glass. Use safety glasses to prevent your eyes from glass shards.

3. Gently but firmly insert a thin iSesamo tool about an inch between the broken back glass and the frame.
4. Do not insert the iSeasmo by the camera! There is a cable by the camera that may be cut if you insert the iSeasmo there!
5. Slice all the way around the phone's edges to cut all of the adhesive.
6. Do not slice around the camera area! There is a cable by the camera that may be cut if you slice around there with the iSeasmo.
7. It is also possible to slightly heat the area with a hair dryer to loosen tough adhesive.

8. Open the phone like a book and set the rear glass assembly aside.
9. Disconnect the fingerprint sensor.
10. Put down some 4 mm Tesa tape to act as replacement adhesive before reassembling your device.
11. Remove the fingerprint sensor from the broken/scratched back glass and reconnect the fingerprint sensor pad to your new back glass before closing the device.

12. Apply your new back glass assembly onto your phone. Apply some light force onto the back of the phone so that the adhesive sets.