How to remove and clean the Dyson DC14 filter

ID: 11484

Description: The filter on the Dyson DC14 vacuum needs to be...

Steps:

1. The filter is located in the canister of your vacuum.

2. Open the canister filter compartment. Push the clip upwards, and open the canister top away from you.
3. Remove the yellow filter housing.

4. Remove the blue sponge-filter from the yellow filter housing.
5. The filter and housing must both be completely dry before reinstalling. Do not use your vacuum without filters installed.
6. Clean the blue sponge-filter in cold water until the water runs clear.