WEN 18 Gauge 2-Inch Air Brad Nailer Pressure Regulator Knob Replacement

ID: 115341

Description: If you need to replace a Brad Nailer Pressure...

Steps:

  1. Using a 2mm Allen wrench, remove the Allen screw located on the pressure regulator knob on the back of the brad nailer.
    2. Step image
  2. Remove the knob from the gun and replace the knob.
  3. Be aware of the rubber spacer that will come off with the knob; when you replace the knob put the spacer back in the middle around the screw hole.
    4. Step image
Back