Hover-1 Superstar Front Bumper LED Replacement

ID: 115391

Description: Often times the lights on the Hover-1 Superstar...

Steps:

  1. Flip your Hover-1 Superstar device upside down.
  2. Using a Phillips #1 screwdriver, remove all twenty of the 18mm screws holding the case onto the device.
  3. Remove the bottom case. Be careful of the connector holding the case and the device together.
    4. Step image Step image Step image
  4. Locate the cable connected to the front lights.
  5. Pull apart the wires until the black clip separates.
    6. Step image
  6. Grab the wire of the connector you disconnected from the case earlier and slide the entire light out away from the case.
    7. Step image
Back