Hover-1 Coast Wheel Replacement

ID: 115399

Description: If you are ever in the situation where any of...

Steps:

1. Identify the wheel you are wanting to replace.

2. Find the Socket wrench located in the Hover-1 Coast packaging.
3. Use the 9/16 inch side to loosen the skateboard nut by turning counterclockwise.

4. Remove the nut off the axle.
5. Remove the washer off the axle.

6. To avoid losing any parts, place them on a flat surface.
7. Slide the unwanted wheel off the axle.
8. Slide the new wheel on the axle.