Replacing the Metal Plate Holding the Leg of an Ironing Board

ID: 115472

Description: A common type of ironing board has a lever...

Steps:

1. Place the ironing board face down on a flat, stable surface.

2. Unscrew and remove the broken metal plate.

3. Cut the metal sheet into an appropriate size.
4. Use cut proof gloves for protection

5. Using a 1/8" drill bit, drill four holes on each corner where the screws will be placed.
6. Use cut proof gloves for protection

7. On the corner of a flat edge, use a mallet to shape the metal sheet.
8. Keep your hand at a distance from the mallet to avoid hitting your fingers.

9. Using a screwdriver, screw on the new plate with the #10-32 x 3/8" pan-headed screws.

10. Finish repairing the iron board!