LeapFrog LeapPad Ultimate Back Panel Replacement

ID: 115605

Description: Steps on how to open up the back of a LeapFrog...

Steps:

1. Flip over the Pad to its back side to begin the removal of the back panel.
2. Begin by removing the blue rim along the edge of the device. It runs along the green silicone lining.
3. This is very difficult to remove , so do be patient. To help remove the seal, both a metal spudger and plastic opening tool may be used.
4. Remove the pen from its place before starting to avoid tangling.

5. Once the blue rim is removed, the 12 screws will be visible.
6. Use the Phillips #1 screwdriver to unscrew all 12 screws.