AARP RealPad MA7BX2 Back Cover Replacement

ID: 115642

Description: This guide will show you in detail how to...

Steps:

1. Loosen the back cover using the suction cup.
2. Pull up on the center of the back with the suction cup.
3. Pull up on all four corners of the back with the suction cup.

4. Remove the back cover by gently placing the small opening tool in the crevice created by loosening the back.
5. Slide the opening tool around the edges of the device.
6. Wedge it open using the opening tool.
7. Use the suction cup again if you're having trouble removing the back cover.

8. The black tape is stuck to delicate wires; remove with caution.
9. Peel off the silver tape.
10. Gently pull off the black tape.

11. Using a JIS #000 screwdriver, remove the two 2.5 mm screws.

12. Lift off the black audio cover.