Cingular 8125 Speakers Replacement

ID: 11574

Description: Use this guide to repair your Cingular 8125...

Steps:

  1. Hold the phone with the back (camera side) facing you.
  2. Press on the battery cover until it slides off.
  3. Lift up the black tab that sticks out on the battery's side until the battery is pulled out.
  4. Using the iFixit Opening Tool, pull on the phone's camera cover until it pops off.
    5. Step image
  5. Remove the four black Torx head screws in each corner.
    6. Step image
  6. Pull on the back cover of the phone with the iFixit opening tool until the green motherboard is revealed.
    7. Step image
  7. Remove the black plastic piece from the motherboard by gently pulling it off.
  8. Align the white squares on the motherboard and the speakers.
  9. You'll know they are lined up correctly when the speaker's wires face the motherboard's center.
  10. Press down on the white squares until they snap together.
    11. Step image
  11. Place the back cover of the phone over the motherboard.
  12. Check to be sure the speaker's black piece is against the holes in the back cover.
    13. Step image
  13. Screw the four Torx head screws with the 64 Bit Driver Handle to connect the back cover to the motherboard.
  14. Press the camera cover down on the back cover until it snaps into place.
  15. Line up the copper terminal on the battery with the terminal on the phone, then press the battery back into place.
  16. Make sure the black tab sticks out.
  17. Slide the battery cover over the camera cover until it snaps back into place.
Back