Korg nanoKONTROL2 Disassembly

ID: 117910

Description:

Steps:

  1. Start by unplugging, then remove all the faders and knobs, by lifting them up gently.
    2. Step image Step image Step image
  2. Remove the 8 screws on the bottom. Ensure that you have the right screwdriver bit, and that you go slowly and use enough force to turn the screw without stripping it.
  3. (Serial numbers and personal info removed from picture)
    4. Step image Step image
  4. After opening back lid, remove 14 screws from inside.
    5. Step image Step image
  5. You can now remove the main circuit board, lifting out the left side first. (as the mini-USB port may hold the right side in.)
  6. The rubber buttons can now easily come out.
    7. Step image Step image Step image
  7. Features: (first picture)
  8. 8 faders
  9. 8 potentiometers
  10. 8 x Solo, Mute, Record buttons
  11. 5 + 4 transport buttons
  12. 2 track buttons
    13. Step image
  13. Chips
  14. Labelled with: 2210CFP24V H8S/2210C TH30140 1325
  15. ROSON Crystal oscillator, labelled with 24.000F20 HO
  16. LW051A 58A04 P256 Texas Instruments Analog multiplexer
  17. Mini-usb port
  18. Power indicator LED
    19. Step image Step image
Back