Hover-1 XLS Battery Replacement

ID: 119170

Description: If the bike is not performing at its maximum...

Steps:

  1. Remove the four, 12mm Hex #3 screws located on the bottom half of the battery compartment.
  2. There are four screws that need to remove. Two on one side and the two on the opposite side.
    3. Step image Step image Step image
  3. Remove the adhesive holding the wires tightly.
  4. You can use a sharp object to score the adhesive before pulling.
  5. Pull on both sides of the wire connections.
    6. Step image Step image Step image
Back